Front View – SFF chassis with optional Universal Media bay shown

1.

Optional front display port (Via Universal Media Bay)

8.

USB 3.0

2.

Quick removal access panel

9.

Serial number label pull tab

3.

Power On/Standby button and system power LED

10.

Box 3 -  8 SFF Drive Cage Bay

4.

Health LED

11.

Box 2 - Optional 8 SFF Drive Cage Bay

5.

NIC status LED

12.

Box 1 - Universal Media Bay (optional):

6.

UID button/LED

13.

Drive support label

7.

iLO Service Port

14.

Optional USB 2.0 (via Universal Media Bay)

Front View – 12LFF chassis shown

1.

Health Status

5.

12 x LFF media

2.

Power On/Standby button and system power LED button

6.

Drive support label

3.

NIC Status

7.

Quick removal access panel

4.

UID button/LED

Internal View 8SFF chassis

1.

2 Processors, heatsink showing

5.

Smart Array connector

2.

Hot Plug redundant HPE Flexible Slot Power supplies

6.

DDR DIMM Slots¹

3.

Second (optional) riser (Requires second CPU)

7.

Hot plug fans (6 single rotor standard)²

4.

Primary riser

Notes:

- ¹Shown fully populated in 32 slots (16 per processor)

- ²High performance temperature fans optional

Rear View – Standard for all DL380 Gen10 Plus

1.

Primary Riser. PCIe 4.0 Slots (Slots 1-3)

6.

VGA connector

2.

Secondary Riser. PCIe 4.0 Slots (Slots 4-6)

7.

OCP NIC ports (if equipped)¹

3..

Tertiary Riser (Slots 7-8).

8.

USB connectors 3.0 (2)

4.

Optional serial port

9.

Dedicated ILO Management Port

5.

Power Supply 1 and 2

10.

Blank cover, not available for use

Notes:  ¹ Supports various NICs, up to 200GbE.

What’s New

· New Pre-configured SKUs using Broadcom Tri-mode controllers

· New Pre-configured SKU using HPE SR100i Gen10 Plus FIO Software RAID/VROC SATA controller

· HPE NVMe Gen4 High Performance Low Latency Write Intensive SFF BC U.2 P5800X SSD drives

· HPE Slingshot SA210S Ethernet 200Gb 1-port PCIe NIC

Platform Information

 Form Factor · 2U rack

Chassis Types

·  8SFF (SAS/SATA) with optional SFF Universal Media Bay (P14609-B21), 8SFF midtray, and/or up to 6SFF rear drive bay options

· 24SFF bay (SAS/SATA) with optional 8SFF mid tray drives and/or up to 6SFF rear drive bay options to a total 38 SFF drives

· 8LFF with Universal Media Bay (standard), supporting 2SFF front, optional 8SFF mid tray or 4LFF mid tray, and up to 4LFF rear or 6SFF rear drive bay options

· 12LFF with optional 4LFF mid tray and up to 4LFF rear for a total 20LFF drives

HPE iLO 5 on system management memory

· 32 MB Flash

· 4 Gbit DDR 3 with ECC protection

Maximum Internal Storage

Software RAID

· HPE Smart Storage SR100i Gen10 Plus SW RAID

Notes:

- HPE Smart Array SR100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.

- HPE Smart Array SR100i SR Gen10 SW RAID is off by default and must be enabled.

- The SR100i uses 14 embedded SATA ports, but only 12 ports are accessible.

- The SR100i supports Windows only.

- Supports up to 2 NVMe drives maximum via system board direct connection only.

- Does not support CM6, CD6, P4xxx, and PE80xx NVMe drives.

- For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot volume. For more information 

· Intel® Virtual RAID on CPU (Intel® VROC)

Notes: Requires selection of Second Processor.

Essential RAID Controller

· HPE Smart Array E208i-a SR Gen10 Controller

· HPE Smart Array E208i-p SR Gen10 Controller

· HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID Controller

· HPE Smart Array P408i-a SR Gen10 Controller

· HPE Smart Array P408i-p SR Gen10 Controller

· HPE Smart Array P408e-p SR Gen10 Controller

· HPE Smart Array P816i-a SR Gen10 Controller

Notes:

- Performance RAID Controllers require the HPE Smart Hybrid Capacitor (P02377-B21) or the HPE Smart Storage Battery (P01366-B21) which are sold separately.

Tri-Mode Controller

· HPE MR416i-p Gen10 Plus Controller

· HPE MR416i-a Gen10 Plus 12G Controller

· HPE MR216i-p Gen10 Plus 12G Controller

· HPE MR216i-a Gen10 Plus 12G Controller

· HPE SR932i-p Gen10 Plus Controller¹

Notes:

- PE80xx NVMe drives are not supported.

- ¹Requires x16 riser slot

· HPE SR416i-a Gen10 Plus Controller

Notes: PE80xx NVMe drives are not supported.

Interfaces

Operating Systems and Virtualization Software Support for ProLiant Servers

• See HPE Servers Support & Certification Matrices 

- Microsoft Windows Server 

- VMware ESXi

- Red Hat Enterprise Linux (RHEL)

- SUSE Linux Enterprise Server (SLES)

- Canonical Ubuntu

- Oracle Linux and Oracle VM

- Citrix

Memory Population guidelines

HPE ProLiant DL380 Gen10 Plus

Notes:

- DIMMs need to be selected in even quantities. Using odd quantity of DIMMs in configurations will cause memory to be unbalanced and may negatively impact system performance.

- Ommited DIMM counts/socket not qualified by Intel.

- ¹ Required by Sub-NUMA Cluster (SNC) configurations, must be ordered with 12 DIMM SNC2 FIO Enable Kit (P26933-B21).

- ² Support Hemi (hemisphere mode).

- ³ Support Software Guard Extensions (SGX)

General Memory Population Rules and Guidelines:

· DIMMs need to be selected in even quantities. Using odd quantity of DIMMs in configurations will cause memory to be unbalanced and may negatively impact system performance.

· Install DIMMs only if the corresponding processor is installed.

· If only one processor is installed in a two-processor system, only half of the DIMM slots are available.

· To maximize performance, it is recommended to balance the total memory capacity between all installed processors.

· When two processors are installed, balance the DIMMs across the two processors.

· White DIMM slots denote the first slot to be populated in a channel.

· Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.

· The maximum memory speed is a function of the memory type, memory configuration, and processor model.

· The maximum memory capacity is a function of the number of DIMM slots on the platform, the largest DIMM capacity qualified on the platform, and the number and model of installed processors qualified on the platform.

· For details on the HPE Server Memory Options Population Rules.

· To realize the performance memory capabilities listed in this document, HPE DDR4 Smart Memory is required.

· For additional information, please see the HPE DDR4 Smart Memory QuickSpecs.

Registered DIMM (RDIMM)

HPE SKU P/N

P07525-B21

P06029-B21

P06031-B21

P40007-B21

SKU Description

HPE 8GB (1x8GB) Single Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit

HPE 16GB (1x16GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit

HPE 16GB (1x16GB) Dual Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit

HPE 32GB (1x32GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit

DIMM Capacity

8GB

16GB

16GB

32GB

DIMM Rank

Single Rank (1R)

Single Rank (1R)

Dual Rank (2R)

Single Rank (1R)

Voltage

1.2 V

1.2 V

1.2 V

1.2 V

DRAM Depth [bit]

1G

2G

1G

2G

DRAM Width [bit]

x8

x4

x8

x4

DRAM Density

8Gb

8Gb

8Gb

8Gb

CAS Latency

22-22-22

22-22-22

22-22-22

22-22-22

DIMM Native Speed

3200 MT/s

3200 MT/s

3200 MT/s

3200 MT/s

HPE SKU P/N

P06033-B21

P06035-B21

SKU Description

HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit

HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit

DIMM Capacity

32GB

64GB

DIMM Rank

Dual Rank (2R)

Dual Rank (2R)

Voltage

1.2 V

1.2 V

DRAM Depth [bit]

1G

2G

DRAM Width [bit]

x8

x4

DRAM Density

8Gb

8Gb

CAS Latency

22-22-22

22-22-22

DIMM Native Speed

3200 MT/s

3200 MT/s

Notes: The maximum memory speed is a function of the memory type, memory configuration, and processor model.

Also, DIMMs need to be selected in even quantities. Using odd quantity of DIMMs in configurations will cause memory to be unbalanced and may negatively impact system performance.For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/memory-speed-table

Load Reduced DIMM (LRDIMM)

HPE SKU P/N

P06037-B21

P06039-B21

SKU Description

HPE 128GB (1x128GB) Quad Rank x4 DDR4-3200 CAS-22-22-22 Load Reduced Smart Memory Kit

HPE 256GB (1x256GB) Octal Rank x4 DDR4-3200 CAS-26-22-22 Load Reduced 3DS Smart Memory Kit

DIMM Capacity

128GB

256GB

DIMM Rank

Quad Rank (4R)

Octal Rank (8R)

Voltage

1.2 V

1.2 V

DRAM Depth [bit]

2G

2G

DRAM Width [bit]

x4

x4

DRAM Density

8Gb

8Gb

CAS Latency

22-22-22

22-22-22

DIMM Native Speed

3200 MT/s

3200 MT/s

Notes: The maximum memory speed is a function of the memory type, memory configuration, and processor model. Also, DIMMs need to be selected in even quantities. Using odd quantity of DIMMs in configurations will cause memory to be unbalanced and may negatively impact system performance.

DDR4 memory options part number decoder

Notes:

- Capacity references are rounded to the common gigabyte (GB) values.

o 8GB = 8,192 MB

o 16GB = 16,384 MB

o 32GB = 32,768 MB

o 64GB = 65,536 MB

o 128GB = 131072 MB

o 256GB = 262144 MB

o 512GB = 524288 MB

System Unit

Dimensions

· SFF Drives:

8.75 x 44.54 x 71. cm / 3.44 x 17.54 x 28 in

· LFF Drives:

8.75 x 44.54 x 74.9 cm / 3.44 x 17.54 x 29.5 in

Weight (approximate)

· Maximum: 8 SFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x Smart Array, 2x Risers installed)

- Maximum:

28.77 kg / 63.43 lbs

- Minimum:

16.12 kg /35.54 lbs

· Maximum: 12 LFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x Smart Array, 2x Risers installed)

- Maximum:

33.99 kg / 74.94 lbs

- Minimum:

22.48 kg / 49.56 lbs

Input Requirements (per power supply)

Rated Line Voltage

· For 1800W-2200W (Titanium) Power Supply: 200-240 VAC

· For 1600W (Platinum) Power Supply: 200-240 VAC

· For 800W (Titanium) Power Supply: 200-240 VAC

· For 800W (Platinum) Power Supply: 100-240 VAC

· For 800W (Universal) Power Supply: 200-277 VAC

· For 800W (-48VDC) Power Supply: -40 Vdc to -72 Vdc

BTU Rating

Maximum

· For 1800W-2200W Power Supply: 6497 BTU/hr (at 200 VAC), 6868 BTU/hr (at 208 VAC), 7230 BTU/hr (at 220 VAC), 7596 BTU/hr (at 230VAC), 7962 BTU/hr (at 240VAC)

· For 1600W Power Supply: 5918 BTU/hr (at 200 VAC), 5888 BTU/hr (at 220 VAC), 5884 BTU/hr (at 240 VAC)

· For 800W (Titanium) Power Supply: 2905 BTU/hr (at 200 VAC), 2899 BTU/hr (at 220 VAC), 2893 BTU/hr (at 240 VAC)

· For 800W (Platium) Power Supply: 3067 BTU/hr (at 100 VAC), 2958 BTU/hr (at 200 VAC), 2949 BTU/hr (at 240 VAC)

· For 800W (Universal) Power Supply: 2964 BTU/hr (at 200 VAC), 2951 BTU/hr (at 230 VAC), 2936 BTU/hr (at 277 VAC)

· For 800W-(48Vdc) Power Supply: 2983 BTU/hr (at -40 Vdc), 2951 BTU/hr (at -48Vdc), 2912 BTU/hr (at -72Vdc)

Relative Humidity (non-condensing)

· Operating

8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing. 

· Non-operating

5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing..

Power Supply Output (per power supply)

Rated Steady-State Power

· For 1800W-2200W: 1800W(at 200 VAC), 1900W(at 208 VAC), 2000W(at 220 VAC), 2100W(at 230VAC), 2200W(at 240VAC)

· For 1600W Power Supply: 1600W (at 240 VAC), 1600W (at 240 VDC) for China only

· For 800W (Titanium) Power Supply: 800W (at 200 VAC), 800W (at 240 VAC), 800W (at 240 VDC) for China only

· For 800W (Platinum) Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VDC) input for China only

· For 800W (Universal) Power Supply: 800W (at 200 VAC), 800W (at 277 VAC)

· For 800W (-48VDC) Power Supply: 800W (at -40 Vdc), 800W (at -72Vdc)

Maximum Peak Power

· For 1800W-2200W Power Supply: 1800W(at 200 VAC), 1900W(at 208 VAC), 2000W(at 220 VAC), 2100W(at 230VAC), 2200W(at 240VAC)

· For 1600W Power Supply: 1600W (at 240 VAC), 1600W (at 240 VDC) for China only

· For 800W (Titanium) Power Supply: 800W (at 200 VAC), 800W (at 240 VAC), 800W (at 240 VDC) for China only

· For 800W (Platinum) Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VDC) input for China only

· For 800W (Universal) Power Supply: 800W (at 200 VAC), 800W (at 277 VAC)

· For 800W (-48VDC) Power Supply: 800W (at -40 Vdc), 800W (at -72Vdc)